Check to make sure the pilot light is burning. Some furnace units must be lit by hand if the pilot light goes out.
Follow the instructions for relighting usually printed on access doors. If you have difficulty relighting the pilot light, call a qualified heating contractor for advice.
Check the blower and vacuum out any dust or debris in and around the unit. Check or replace the filter every 30 days. A dirty air filter clogs the air flow and it can overwork the equipment.
Lubricate the blower motor.
Remove the flame shield and check the burner for corrosion. Check flames with the fan off and on to conform to proper operation.
Check the flue for gaps or dents and make sure it is venting properly to the outdoors.
Vacuum all the dust from the air registers around the house.
Check motion and make sure they are clear of furniture rugs, drapes, etc. to let the air flow freely.
Spun Fiberglass Filters are the least expensive, disposable filters. They don’t, however, adequately filter out finer particles.
Pleated Disposable Filters are more costly but will provide four to eight times the filtering capability of the spun fiberglass filters.
Washable Electrostatic Filters have a high initial cost but they are re-useable and offer much higher filtration rates.
There are Electric Filters and Mass Media Filters that offer superior filtration but they require modification to the ductwork for installation. But note that installing these types of filters is not a do-it-yourself project; they should be professionally installed.
Gilbert Sotelo grew up in the air conditioning and heating business working for his father at a very early age. He started Jade Air in 1991 naming the business after his son. Gilbert prides himself on providing his customers with honest and reliable service as if you were one of the family.